rc-switch
Use your Arduino or Raspberry Pi to operate remote radio controlled devices
Download
Wiki
Info
Send RC codes
Use your Arduino or Raspberry Pi to operate remote radio controlled devices. This will most likely work with all popular low cost power outlet sockets. If yours doesn’t work, you might need to adjust the pulse length.
All you need is a Arduino or Raspberry Pi, a 315/433MHz AM transmitter and one or more devices with one of the supported chipsets:
SC5262 / SC5272
HX2262 / HX2272
PT2262 / PT2272
EV1527 / RT1527 / FP1527 / HS1527
Intertechno outlets
Receive and decode RC codes
Find out what codes your remote is sending. Use your remote to control your Arduino.
All you need is an Arduino, a 315/433MHz AM receiver (although there is no instruction yet, yes it is possible to hack an existing device) and a remote hand set.
For the Raspberry Pi, clone the https://github.com/ninjablocks/433Utils project to compile a sniffer tool and transmission commands.
References
Used by
RCSwitch Library Sample
SoC support
esp32
esp32c2
esp32c3
esp32s2
esp32s3
esp8266
host
rp2040